CAN-BUS CONVERTER HIGH BEAM WITH UNI WIRING HARNESS
135,21 €
Article code: 35-875-HB
• Availability:
• Delivery time up to 6 Days *
• dispatch weight: 0,1 KG
• Packing unit: STK
• Product group: 1A
• Packing unit: STK
• Product group: 1A
135,21 €
Availability:
Delivery time up to 6 Days *
Article code: 35-875-HB
dispatch weight: 0,1 KG
Packing unit: STK
Packing unit: STK
The CAN Bus converter is an interface which allows you to control additional high beams. The Installation requires only little effort. Two wires (CAN Hi & CAN Lo) are connected together with a p... [more]
The CAN Bus converter is an interface which allows you to control additional high beams.
The Installation requires only little effort. Two wires (CAN Hi & CAN Lo) are connected together with a permanent 12V supply and a ground connection to the CAN Bus. By the signal (12V) which the interface outputs, the relay for the additional headlights can be controlled. The signal can be loaded with 1 Amp. The additional headlights are then switched on as soon as the high beam is activated.
The interface has LEDs which indicate the current status:
- Red flashing: CAN signal is searched
- Red permanent: CAN signal detected but vehicle type not
- Green permanent: CAN signal detected, Vehicle detected
- Green flashing: Speed signal detected
Wiring:
- White: CAN Hi
- Blue: CAN Lo
- Black: Ground connection
- Purple: Signal output for high beam
CAN-BUS CONVERTER HIGH BEAM WITH UNI WIRING HARNESS
135,21 €
Article code: 35-875-HB
• Availability:
• Delivery time up to 6 Days *
• dispatch weight: 0,1 KG
• Packing unit: STK
• Product group: 1A
• Packing unit: STK
• Product group: 1A
135,21 €
Availability:
Delivery time up to 6 Days *
Article code: 35-875-HB
dispatch weight: 0,1 KG
Packing unit: STK
Packing unit: STK
PRODUCT DATA
The CAN Bus converter is an interface which allows you to control additional high beams.
The Installation requires only little effort. Two wires (CAN Hi & CAN Lo) are connected together with a permanent 12V supply and a ground connection to the CAN Bus. By the signal (12V) which the interface outputs, the relay for the additional headlights can be controlled. The signal can be loaded with 1 Amp. The additional headlights are then switched on as soon as the high beam is activated.
The interface has LEDs which indicate the current status:
- Red flashing: CAN signal is searched
- Red permanent: CAN signal detected but vehicle type not
- Green permanent: CAN signal detected, Vehicle detected
- Green flashing: Speed signal detected
Wiring:
- White: CAN Hi
- Blue: CAN Lo
- Black: Ground connection
- Purple: Signal output for high beam
REQUEST
* Valid for shipments within Germany. Delivery times to other countries and information on the calculation of the delivery see here.